Tel

Stainless steel resists chemicals, salts, heat, cold, moisture, UV light and high temperatures Secure outdoor signs, bundle cables and create custom clamps for hoses and duct work Use with Tensioner and Seals

Silicone lubricant specially formulated for all air-assisted cable placement applicationsResistant to the drying effects of high volume air movementDesigned to leave a minute yet highly effective layer of silicone on the interior of the conduitSuperior friction reduction properties with no “viscous drag” effects on cableCompatible with all types of cable and conduit

• Cable Type: Cat5e Booted
• Conductor Type: 24 AWG, Stranded Tinned Copper
• Cable Jacket: PVC CM
• Shielding Type: Unshielded (UTP)
• Connectors: RJ45 Male 50m? gold-plated
• Insulation: high density polyethylene, .005″ nominal wall thickness

Space Saving Design
Made of sturdy, rolled-edge, anodized steel
Fully enclosed design for protection of printed circuitry during termination.
Color-coded for T568A and T568B wiring schemes.
Constructed from UL94-V-0 high-impact, fire-retardant ABS or PC material.
Pair punch sequence enables a pair twist within 1/2, of termi- nation.
Beryllium copper contacts: 50,µ gold-plated pins over100,µ nickel layer.
Insertion life cycle: 750 cycles (minimum) / I.D.C. 250 cycles (minimum).
Operating temperature: -40,°C to +68,°C.
FCC Part 68
1xEIA Unit 19(W)x1.3/4(H)x1.1/4(D)
UL Listed, RoHS Compliant

•Manufactured from flexible HDPE makes gradual bends without special equipment
•Continuous lengths reduce joining costs
•Excellent low temperature properties allows installation in cold climates
•Outstanding long term cable protection from shifting ground rock and root impingement
•Provides a permanent pathway simplifies future cable repairs or replacement

•Made like a standard reverse thread coupler except for the amount of taper is increased.
•Can accommodate a wide variation in outside diameter of the duct.
•Good pullout strength.
•Works equally well with corrugated, ribbed, or smooth-wall conduit.

Designed for coupling HDPE & PVC conduit Can also be used to couple dissimilar conduits such as HDPE to PVC, threaded or
non-threaded metal conduit, or fiberglass (FRP) conduit Stainless steel band clamps (hand tightened using a 5/16″ nut driver) and locking ring Pre-lubricated O-ring forms an air-tight seal to withstand 125 psi One person installation; re-enterable, no special tools required Air and water tight No I.D. reduction Excellent pull out strength on HDPE, PVC, FRP and steelNo-Stop version available for confined areas or repairs (*NS) Specialized for use by electrical installers requiring ETL/UL listing, including
CSA STD C22.2 18.3-04 and UL STD 514BNot recommended for plow chute

Presure Tight and ReuseableSmooth or Ribbed Innerduct Contains no metal parts

• Flexibility in the field
• Ensures reliability
• For copper or aluminum conductor
• Application variability
• Chemical resistant
• UV Rated
• Entry port closure
• Prevents oxides from forming

•In-line or butt splice capability
•Pre-formed radiuses maintain bend requirements
•Interlocking base and cover provides tray stability without the use of a bolt
•Extended finger guides easily store and route loose fiber or ribbon

•In-line or butt splice capability
•Pre-formed radiuses maintain bend requirements
•Interlocking base and cover provides tray stability without the use of a bolt
•Extended finger guides easily store and route loose fiber or ribbon

•Includes (5) cable kits for sealing/retention and (2) ground terminals with removable bond
•Supports stranded loose tube, Uniflex® or ribbon fiber cables in either armored or dielectric configurations
•Installation and re-entry using common hand tools
•Fully sealed to protect fiber and splices ensuring longevity
•Fully kitted with all parts to install five cables
•Designed and tested to Telcordia® GR-771 requirements
•Rural Utilities Service (RUS) listed

• High strength corrosion resistant copper alloy connectors for use in bonding applications
• Designed to provide high clamping force
• Split bolt will accept on any combination of two conductors shown in the chart below
• UL and CUL listed

• Manufactured from high strength copper alloy. Provides maximum conductivity and high breakage resistance.
• Precision tooled threads allows maximum torque to be applied.
• UL Listed and CSA Certified.
• Suitable for use in circuits rated 35KV or less (Refer to UL486A – UL486B); proper high voltage spacing and insulation techniques must be used.
• For use with copper conductor types: Solid, Compact, Compressed, Concentric..
• UL 467 Listed for grounding and bonding thru 500 kcmil.
• CSA ceritfied for grounding and bonding thru 250 kcmil.
• Suitable for Direct Burial in earth & concrete thru 500 kcmil.
• RUS Accepted 8 thru 1/0 AWG
• ROHS compliant.
• UL File E6207

Radii listed are available and larger radii can be suppliedAll elbows are supplied with plain endsFor installations with other conduit systems, we offer an assortment of transition and termination fittings that can be installed on our elbows

Used to seal vacant or occupied ductsCan be custom ordered to assure exact OD & ID configurations for your project’s application. Available in 1” thru 4” sizes (solid, split and with pre-sized cable openings) Contain no metal partsApplications are for long-term and temporary duct sealingRemovable to allow future duct access Provides sediment infiltration protection, rodent control, and are gas and watertight under normal environmental conditions

Push Plugs applications are for long term and temporary duct sealing Removable to allow future duct access.Sediment infiltration protection, rodent control, are gas and watertight under normal enviromental conditions

Designed as a simple, economical solution to the problem of connecting polyethylene duct to standard IPS metal or PVC pipe or fittings. Couplings are air tight to 180 lbs. psiHave high pullout strength and can easily handle the leverage stresses exerted from connecting large radius sweeps and full-length pipe sections.

Threaded couplers have threads to screw onto the conduitThey can be standard, reverse threaded or taperedThreaded couplers are simply to install

Threaded couplers have threads to screw onto the conduitThey can be standard, reverse threaded or taperedThreaded couplers are simply to install