Tel

Solves cabling issues for smaller ducts, allowing a range of cable sizesEnables overlay of cables in occupied conduitsReduces or eliminates number of conduits required in new constructionMelting point of 419F (almost twice that of HDPE)Resistant to ground chemicals and petroleum productsConstructed of PET multifilament and Nylon 6 monofilament yarnsPatented fabric design may reduce pulling tension by up to 20% over previous MaxCell versionsPre-lubed for lower friction during MaxCell and cable installation*Manufactured in the U.S.A.

Electronically marks and relocates buried facilitiesUnique design produces a uniform, spherical RF field in every directionEasily located up to 5 FT away with any modern marker locatorWider field with a signal peak directly above the marker provides precise locationRequires no particular orientation when buriedThe Omni Marker provides greater range than 4-inch ball markers that use a dipole fieldHigh-reliability design lasts as long as your buried plantColor coded by utility application

PRO-TRACE® High-Flex Copper Clad Steel Tracer Wire
30 mil-PE 12 AWG Tracer Wire
Direct Burial Use at 30 Volts and RoHS Compliant
2500 Ft Reel

Features:Used to provide a solderless connection between #6 ground wire and a ground rodThe clamp is constructed of cast bronze with a 1/2″ hexagonal head stud

Direct bury, underground duct, and lashed aerialTrunk, distribution, and feeder cableLocal loop, metro, long-haul, and broadband networkDry (SAP) core standard reduces cable prep
and installation time Standard tube size
for all fiber counts
reduces the number
of tools requiredCorrugated steel armor improves compressive strength
and rodent protection PFM gel is a non-sticky gel that speeds fiber
access and clean-up Telcordia® GR-20-CORE RDUP PE-90 Designation MLT ICEA S-87-640-2011 RoHS-compliant

• Corrugated steel tape armor is strong yet flexible• Provides additional crush and rodent protection• Possesses high flexibility and durability when used in harsh environments or limited spaceOur reels have a manufacturing variance of up to 5%, you will be billed for the quantity that ships.

Ovaleye bolt5/8″ dia. x 14″ long with 6″ thread lengthIncludes one square nutEye dimensions are 5/8″ x 1 1/2″ x 2″Rated tensile strength is 13,550 lbsGalvanized steel per ASTM A-153Manufactrured in compliance with ANSI C135.4 and C135.5.

Used for attaching strand to corner polesAccepts 1/4″ (6.6m) to 7/16″ (16m) strandClamp consists of two mating plates, two 5/8″-11 track bolts with attached square nutsClamp plates are 2-3/16″ wide and 7″ longOne plate is flared at each end to facilitate pulling strand through the clamp and has a substantial projecting lip to retain the strand in the groovesThe center hole on the Corner Suspension Clamp is for use with a 5/8″ or 3/4″ diameter bolt.Hot dip galvanized to meet ASTM Specification A153.

•Fits 6.5″x22″ COYOTE Dome, 9.5″x28″ COYOTE Dome, 8.5″x22″ COYOTE Closure, 6.5″x22″ COYOTE Splice Case, 8″x28″ COYOTE Splice Case and 9.5″x28″ COYOTE Splice Case
•Trays are injection-molded with a hinged, clear plastic cover for maximum fiber protection
•Clear plastic cover allows for visible inspection of the fibers
•A series of tabs along the tray perimeter are easily removed to simplify routing of the fiber.
•Trays are injection-molded with a hinged, clear plastic cover for maximum fiber protection
•Clear plastic cover allows for visible inspection of the fibers
•A series of tabs along the tray perimeter are easily removed to simplify routing of the fiber.

•Standard 6-1/2″ Dome Kits provided with (2) 8003691 grommets and (2) 8003692 grommets. Customized kits available upon request
•Butt/Expressed Splice Configuration
•Application: Direct buried, below grade, pole/wall mount or aerial
•Quick to assemble, no special tools required
•Tested in accordance to GR-771-CORE by an independent outside lab
•Collar system allows for quick re-entry
•Segmented end plate design provides independent access to every cable
•Flexible grommet sealing technology supports a wide range and quantity of flat or round cable profiles.

• Engineered and manufactured for maximum performance and quality.• Made from 100% high-quality plastic to ensure efficient recycling.• Inside serration for a strong grip onto bundles.• Easy application either manually or with a tensioning tool.• Bent tail allows for simpler insertion.

Manufactured from flexible HDPE, makes gradual bends without special equipmentContinuous lengths reduce joining costsExcellent low temperature properties, allows installation in cold climatesOutstanding long term cable protection from shifting ground, rock and root impingementProvides a permanent pathway, simplifies future cable repairs or replacement

Leak tested at 230 PSI and resistant to corrosion and most chemicals.Excellent for both blowing and pulling methods.Comfit has a compact profile reducing difficulties traditionally encountered in manholes, narrow trenches and plowing machines.Push-fit method ensures fast and simple assembly and disassembly. Push the duct ends into the coupler for a locked and air sealed assembly. No special tools are needed.

Corrosion Proof Gas & Water Tight Debris & Animal Secure Available in 14 Sizes & 3 Styles Removable & Reusable

•Standard 6-1/2″ Dome Kits provided with (2) 8003691 grommets and (2) 8003692 grommets. Customized kits available upon request
•Butt/Expressed Splice Configuration
•Application: Direct buried, below grade, pole/wall mount or aerial
•Quick to assemble, no special tools required
•Tested in accordance to GR-771-CORE by an independent outside lab
•Collar system allows for quick re-entry
•Segmented end plate design provides independent access to every cable
•Flexible grommet sealing technology supports a wide range and quantity of flat or round cable profiles.

• Solid Bare Copper
• Grounding Application

Superior designThe Strand Splice provides maximum strength and excellent fatigue characteristicsResulting in longer life for both strand and messenger.Strand splices are rated for 100% of the strands published rated breaking strength

New technology for increased friction reduction; Will not be displaced by cablesEspecially effective for placement of large cables and long difficult pullsVery effective for conventional copper cablesCan be pumped or installed using gel pak bagsCompatible with all types of cable jacketsSlow drying, leaving a lubricating, non-adhesive filmSafe to use: non-toxic, non-corrosive, non-flammable, and non-stainingAvailable in a wide range of package sizes

PRO-TRACE® Horizontal Directional Drilling Copper Clad Steel Tracer Wire
45 mil-PE 12 AWG Tracer Wire
Direct Burial Use at 30 Volts and RoHS Compliant
2500 Ft Reel