industries (2851 Products)
Rigid PVC plastic conduitUL listedConduit meets the requirements of the UL Sunlight-Resistant rating and is listed by UL for use in direct sunlightCan be used with 90 degree C rated conductorsConduit can be used in above ground or underground installations, including direct burial with or without concrete encasementHeat and fire-resistantCorrosion-resistantBell end
Allows repair of damaged conduit in existing installationsNo cutting and splicingI.D. : 1.610O.D. : 1.900 Weight per 10 ft.: 6.50 lbs.
No. of Rack Spaces: 4U
Enclosure Type: Rack Mountable (fits standard 19 in. rack)
Dimensions (HxWxD): 7in. x 19in. x 14in.
Material: 16 gauge steel with black electrostatic polyester powder coat paint
Capacity: 12 LGX adapter panels (purchased separately)
Fiber Count: Max. 288 (288 LC, 144 SC or ST)
Includes: 8 sexy blue half-moon cable managers, 8 nylon fiber management loops, 16 Velcro tie downs, M6 screws and cage nuts8 zip ties, 4 port identification labels, and 1 ground lug kit
IMSA Specification 19-1 Traffic Signal Cable
14 AWG 2 Cond Solid Bare Copper
For 600 Voltage Power Transmission
Traffic Signal, Traffic Control Systems, Conduit and Aerial Applications
2500 ft Reel
•Simple to use
•Multi hole design
•Supports high drop capacities and a full range of cable diameters
•Grommet Kit contains (1) Grommet, (1) Cable Measure Tape, (1) Silicone Lubricant Pack, (1) Set of Plugs (where applicable)
• Tin-plated copper connector with internal self-cutting threads, for terminating solid wires at connecting points.
• These small terminals are applied with a can wrench. They cut their own thread on solid #6 or #10 AWG copper ground wire.
Category 6 Data Cable
23 AWG 4 Twisted Pair Solid Bare Copper
CMP Rated for Plenum Applications
550 Mhz Bandwith
1,000 ft Pull Box
•Fits COYOTE Runt, COYOTE ONE, COYOTE Expanded Runt, COYOTE In-Line Runt, COYOTE Terminal (Single Chamber), COYOTE Terminal (Dual Chamber), 6.5″x17″ COYOTE Dome and COYOTE PUP
•Trays are injection-molded with a hinged, clear plastic cover for maximum fiber protection
•Clear plastic cover allows for visible inspection of the fibers
•A series of tabs along the tray perimeter are easily removed to simplify routing of the fiber.
•Application: Direct buried, below grade, pole/wall mount or aerial
•In-Line or Butt/Expressed Splice Configurations
•Internal organizer manages buffer tube or ribbon
•Standard Kit provided with (4) 8003701 grommets, customized kits available upon request
•Factory installed gasket allows re-entry and re-use
•Convertible to a COYOTE Terminal Closure with available cover kits
•Flexible grommet sealing technology supports a wide range and quantity of flat or round cable profiles
•Tested in accordance to GR-771-CORE by an independent outside lab
•Available in flame retardant material
•Integrated air valve to confirm seal integrity
•Quick to assemble, no special tools required
•Flat shape allows for mounting in small areas
•Single-ended, O-ring sealed dome closure for splicing feeder and distribution cables
•Gel cable sealing technology allows easy adding or removing of a wide size range of cables
•Compatible with most common cable types: e.g. loose tube, central core, ribbon fiber
•FOSC splice trays hinged for access to any splice without disturbing other trays
•Closure can be used in aerial, pedestal and underground (up to 5 meters) environments
•Compatible with CommScope’s CWDM modules and optical splitter trays
• Used to mechanically bond ground wire to equipment.
• One hole on front of connector for attaching ground wire.
• Accepts ground wire ranging from #14 – #4 AWG
• Mounting hole accommodates 1/4″ stud.
• Body constructed from high strength Bronze alloy .
• Set screw is installed with a flat head screwdriver.
Features:
Thimble Eye5/8″ x 12″StraightQty. 10 Std Pkg, Price per each
Power installed anchor rod used with solid hub or socket drive power installed screw anchorsSelect the appropriate rod diameter based on the ultimate load requirement and lengthTypically installations will use one 7 foot (2.1m) rodThe rod threads must match the hub tapped holeA 5/8″ diameter rod is used with any solid hub or socket drive power installed screw anchor designated for a 5/8″ rodThe 3/4″ and 1″ diameter rods have the same threads and are used for any solid hub or socket drive screw anchor designated for 3/4″ or 1″ rodHot Dip Galvanized per ASTM A123
RHH/RHW/USE – XLP Electrical Wire
2 AWG 1 Cond Annealed Bare Copper
600 Voltage Power Transmission
Conduit and Raceways Installed in Conduit Applications
2500 ft Reel
Accepts 5?8″ mounting hardwareEnd fitting has 5?8″ x 2″ studCleats to prevent bracket rotation on wood polesBase: Ductile Iron, Hot Dip Galvanized End Fitting: Aluminum Rod: Fiberglass, MPS gray ultraviolet (UV) protective coatingMinimum Ultimate Vertical Load: 750 lbs. Minimum Ultimate Horizontal Load: 1500 lbs. Minimum Ultimate Long Load: 750 lbs. 15 Degree Offset
Constructed of high quality steel, hot-dip galvanizedProvided with a gimlet point
Simple, fast and easy to install Rated to hold a minimum of 90% of the rated breaking strength of the strand usedUsed to dead-end strand in guying or overhead applications.Universal bail designFor all grades of galvanized steel wire strand: High Strength, Extra High Strength, Alumoweld(R), Alumonized, Common, Siemens-Martin, Utilities and Bell System StrandBail width 1.6″10.8″ LengthTensile strength: 6,600 lbs.Accommodates strand ranging in size from .215″ to .272″.
Woven polyester pulling tape is a flat woven polyester pulling tape Provides a reliable means of locating cable in conduitHigh quality woven polyester is low stretch, high strength, has pre-lubrication and is sequentially footage marked.
Corrugated steel tape armor is strong yet flexible
Provides additional crush and rodent protection
Possesses high flexibility and durability when used in harsh environment or limited space