Tel

Corrosion ProofGas & Water TightDebris & Animal SecureRemovable & Reusable

Push Plugs applications are for long term and temporary duct sealing Removable to allow future duct access.Sediment infiltration protection, rodent control, are gas and watertight under normal enviromental conditions

Push Plugs applications are for long term and temporary duct sealing Removable to allow future duct access.Sediment infiltration protection, rodent control, are gas and watertight under normal enviromental conditions

2 1/4″ square x 3/16″ thick with 13/16″ diameter hole for 3/4″ diameter boltManufactured in compliance with NEMA PH-10Galvanized per ASTM A-153 or ASTM B695

Includes a 5⁄8″-11×2″ long bolt, lockwasher, hex nut and banding bracket

Simple, fast and easy to install Rated to hold a minimum of 90% of the rated breaking strength of the strand usedUsed to dead-end strand in guying or overhead applications.Universal bail designDesigned for use on High Stregth, Common, Siemens-Martin, Utilities and Ball Systems StrandBail Width 1.5″9.25″ LengthAccommodates strand ranging in size from .31″ to .337″.

Rigid PVC plastic conduitUL listedConduit meets the requirements of the UL Sunlight-Resistant rating and is listed by UL for use in direct sunlightCan be used with 90 degree C rated conductorsConduit can be used in above ground or underground installations, including direct burial with or without concrete encasementHeat and fire-resistantCorrosion-resistantBell end

• Great for route marking and utility identification ownership
• Safety and environmental
• Overlays for existing signs or flexible line markers
• Reflective and non-reflective sheeting available
• Sequential numbering available

Able to support itself
Does not require lashing
Made of non-metallic material

Easy assembly/disassembly, no tools requiredProvide an air- and water-tight connection; keep debris out of MicroDuct pathwayColor coded by sizeTested to meet or exceed the stringent requirements of every local Standard for MicroDuct Connectors, for Air Blown Optical FibersApproved for use at 230PSI/16BarLow profile design

Easy assembly/disassembly, no tools required, low profile designProvide an air and water tight connection Designed and tested to meet or exceed
industry standardsColor coded to easily identify by size Specially designed to ensure a smooth interior
transitionWithstand chemical and harsh environment
conditions

Carrying Bag and Removable Hook included
Not to be used on or near live power lines

16″ Strand/Messenger Aerial Slack Storage Unit, Aluminum, Single-wrapDual coat baked on polyester powder coat finishTie eyelets accommodate both stainless steel and plastic ties.Radius ends ensure no sharp corners.Aluminum brackets and bugnuts with galvanized nuts and bolts Fits all fiber cable up to 1.50 OD.

Effectively seals conduit containing one cableRainproof protectionEasy & Secure installationPrevents dirt, dust, animal disruptions

Push Plugs applications are for long term and temporary duct sealing Removable to allow future duct access.Sediment infiltration protection, rodent control, are gas and watertight under normal enviromental conditions

Limited Tension Deadends: Intended for relatively low tension application usually associated with short span construction. They are not cable or line design specific but are designed to fit broad diameter ranges. Holding performance will vary by specific cable brand and operating conditions. Therefore, no specific holding strength rating is possible.Standard design parameters Broad cable OD ranges, listed on ID tags Short Structural Reinforcing Rods Short dead-end component Structural Reinforcing Rods and deadend components packaged in same carton Fast, easy installation Utilizes economical TC-5F Thimble Clevis

Section of PVC Schedule 40 conduit which as been heated and bent to effect a 90°Both ends are solvent weldCan be used above ground or buried and is suitable for concrete encasement

No sharp edges for installer to cut hands on while tensioning.Highly resistant to both UV (Ultra Violet) light and weather changes.High tensile strength after fastening.

Hubbell

•1-1/8″ x 9″ Tape Strips
•For use with COYOTE Splice Cases