Tel

Dimensions: 12.25”L x 4”W x .5”D
24 Single Fusion Splices, 16 Mechanical Splices, or 96 Mass Fusion Splices
Main Body: Aluminum

Used to strain relieve fiber drop wireEasily RemovableStainless steel construction

Superior corrosion resistance Available in both domestic or imported versions, and in 2500 or 5,000 Reels Galvanized EHS Class A made to ASTM 475A standards or Stainless Steel Options available Available in multiple sizes including 1/4, 5/16, 3/8 and special order for state specific DOT or RUS requirements available

•For use with COYOTE Closure
•12 Fiber splice count

Direct bury, underground duct, and lashed aerial Trunk, distribution, and feeder cable Local loop, metro, long-haul, and broadband network Dry (SAP) core standard reduces cable prep and installation time Standard tube size for all fiber counts reduces the number of tools required Corrugated steel armor improves compressive strength and rodent protectionGel-free tubes speeds fiber access and cleanup 

For applications with smaller diameter cables or insulated ground wiresThe grommets are manufactured from a weather-resistant material Designed to ensure a tight and permanent sealA Silicone Sealant is provided to lubricate the grommet and cables for easy installationThe entry holes are covered with a thin layer of urethane material to provide a choice of which entries are to be used for future cable entries

1-Piece Mold
With Flange

This single-pole long delay circuit breaker provides reliable circuit protection and accurate circuit control to DC applications. In addition to providing conventional overcurrent protection, each breaker can be simultaneously used as an on-off switch.

Aipx LEL or Carling CA1 SeriesSingle Pole80 Vdc maxBullet Terminals

Airtight couplersDesigned to provide simple 2-click plug-and-play joining of MicroDuctsEnables longer runsSafe for pushing and pulling applications

•Used to seal closure
•For use in FOSC 450 C and D Fiber Closures

Integrated bolt or band mount designKeeper and base have an interlocking hinge allowing easy access for pulling-in rope and ADSS cableSingle-bolt clampingStackability for multi-cable installationsMulti-cable installations with the FAS save pole space as the first unit mounts against the pole and added units extend horizontallyDesigned for short span applications where vertical loading does not exceed 1000# (4.4 kN)Can be bolted or banded to structureAluminum Construction

Compatible with 3M Fiber Dome Closures FDC08S and FDC10S Internal drop termination 18-mm single port

• Can be used for Phillips and slotted fasteners plus nuts and bolts as it includes 2 screwdriving bits and shaft is used as a nut driver
• Made of special alloy steel with polished finish for exceptional strength and long life
• Shaft is corrosion-resistant and magnetized to hold bits and fasteners for easy removal and installation
• Ergonomically designed handle with soft rubber grip for greater comfort and torque
• End of the handle is marked to be easily identifiable while stored
• This screwdriver complies with ASME/ANSI standards
• Head Type : Phillips, Cabinet Slotted, Nut Driver
• Phillips Head Size : #1, #2
• Cabinet Slotted Head Size : 3/16″ (4.76 mm), 9/32″ (7.14 mm)
• Nut Driver Size : 5/16″ (7.94 mm), 1/4″ (6.35 mm)
• Handle Type : Rubberized Cushion Grip
• Finish : Polished
• Standards : ASME/ANSI
• Overall Length : 7 1/2″ (190.5 mm)
• Weight : 0.396 lb (179.62 g)

Pneumatically driven, no digging, no damage, no soil disturbanceProof loaded to exact capacity required during installationFast, easy installationInstalled with lightweight, portable equipment32M guy capacity in class 3-5 soils18M & 12M guy capacity in class 6 soilsUsed with 1″ Utility Anchor RodDoes not include the Anchor Rod

Maximizes connectivityOptimized for 1625 nm standard       Leaves no residueEvaporates quicklyNo streakingConvenient packagingNon-hazardous for air shipment

No sharp edges for installer to cut hands on while tensioning.Highly resistant to both UV (Ultra Violet) light and weather changes.High tensile strength after fastening.

Manufactured from flexible HDPERugged corrugated design is flexible and light weight, yet provides excellent crush resistanceOutstanding long term cable protection from shifting ground, rock and root impingementProvides a permanent pathway, simpifies future cable repairs or replacement

Adjustable pull control, up to 1000 lbs. (453kg) maximum on a 40 in. (101cm) diameter capstanSpeeds up to 425 ft/min @ 15 gpm flowControl panel with pressure gauge, pressure adjustment knob and directional foot control valve1/2 in. (12.7mm) non-spill quick-disconnect fittings for 2500 psi maximum hydraulic source inputThree versatile set up options are available: Self-Support, Vehicle Receiver Mount and Socket Mount

•W/4-Port End Plate, (1) 24ct single tray
•Preformed COYOTE Closure
•Dome Splice Closure
•144f/432f ribbon max, 17? x 6.5?

•Includes (3) Ground Lugs, Standard B6, BS Basket and a Test Valve
•Single-ended, O-ring sealed dome closure for splicing feeder and distribution cables
•Gel cable sealing technology allows easy adding or removing of a wide size range of cables
•Compatible with most common cable types: e.g. loose tube, central core, ribbon fiber
•FOSC splice trays hinged for access to any splice without disturbing other trays
•Closure can be used in aerial, pedestal and underground (up to 5 meters) environments
•Compatible with CommScope’s CWDM modules and optical splitter trays