industries

Pull and measure with one productLow coefficient of friction value minimizes burn-through of ductEliminates additional labor required for string, rope, winch line combination. One tape does it allOrder continuous lengths from 3,000 feet to 100,000 feet to meet your requirementsMinimizes puckering in the extrusion process – less footage required for innerduct runsSpecial silicone lubricant which is compatible with innerduct lubricants and greatly minimizes the possibility of burn-through in both PVC and HDPE ducts due to low coefficient of frictionEasily blown through conduit or duct and the high tensile strength ratings permit the use of a single product versus the traditional string, rope, or winch line pulling process

Lightweight Metal SpoolsAvailable in woven polyester and woven Kevlar/AramidPrinted Sequential footage markings and pre-lubricated

Threaded couplers have threads to screw onto the conduitThey can be standard, reverse threaded or taperedThreaded couplers are simply to install

Threaded couplers have threads to screw onto the conduitThey can be standard, reverse threaded or taperedThreaded couplers are simply to install

Threaded couplers have threads to screw onto the conduitThey can be standard, reverse threaded or taperedThreaded couplers are simply to install

This innovative coupling design combines the advantages of low cost, reliability and a fast time saving method of installationEach of the barbed rings function as a separate full circumference seal providing double protection against air passing through the connectionBecause of their design these couplers have a high internal and external sealing capability and exceptional pull out strengthUsing a hydraulic or mechanical coupling presses for installation insures each coupling is installed properly and will increase the overall reliability of every connection

Rigid PVC plastic conduitUL listedConduit meets the requirements of the UL Sunlight-Resistant rating and is listed by UL for use in direct sunlightCan be used with 90 degree C rated conductorsConduit can be used in above ground or underground installations, including direct burial with or without concrete encasementHeat and fire-resistantCorrosion-resistantBell end

Rigid PVC plastic conduitUL listedConduit meets the requirements of the UL Sunlight-Resistant rating and is listed by UL for use in direct sunlightCan be used with 90 degree C rated conductorsConduit can be used in above ground or underground installations, including direct burial with or without concrete encasementHeat and fire-resistantCorrosion-resistantBell end

When snapped together it creates a smooth tight seal

Rigid PVC plastic conduitUL listedConduit meets the requirements of the UL Sunlight-Resistant rating and is listed by UL for use in direct sunlightCan be used with 90 degree C rated conductorsConduit can be used in above ground or underground installations, including direct burial with or without concrete encasementHeat and fire-resistantCorrosion-resistantBell end

High density polyethyleneUV stabilizedUsed with Senior Industries’ SI-7511 Lashing Strap

Prevents Risk of injurys Saves Time

Machine bolt for handing aerial strand and accessories on utility poles5/8″ dia. x 18″ long with 6″ thread lengh and cone pointIncludes one square nutRated tensile strengh 12,400 lbsHot dip galvanized per ASTM A-153These are often referred to as crossarm or through bolts.

Machine bolt for handing aerial strand and accessories on utility poles5/8″ dia. x 16″ long with 6″ thread lengh and cone pointIncludes one square nutRated tensile strengh 12,400 lbsHot dip galvanized per ASTM A-153These are often referred to as crossarm or through bolts.

IMSA Specification 20-1 Traffic Signal Cable
14 AWG 9 Cond Solid Bare Copper
For 600 Voltage Power Transmission
Traffic Signal, Traffic Control Systems, Conduit and Aerial Applications
2500 ft Reel

•Fits 6.5″x22″ COYOTE Dome, 9.5″x28″ COYOTE Dome, 6.5″x22″ COYOTE Closure, 8.5″x22″ COYOTE Closure, 6.5″x22″ COYOTE Splice Case, 8″x28″ COYOTE Splice Case and 9.5″x28″ COYOTE Splice Case
•Trays are injection-molded with a hinged, clear plastic cover for maximum fiber protection
•Clear plastic cover allows for visible inspection of the fibers
•A series of tabs along the tray perimeter are easily removed to simplify routing of the fiber.

•Standard Splice Capacity: 36 Single Fusion or 72 Ribbon/Mass Fusion
•Expanded Splice Capacity: 72 Single Fusion or 144 Ribbon/Mass Fusion
•Application: Loose tube or ribbon fiber applications
•Size allows for mounting in small pedestals and hand holes
•Provided with LOCK-TAPE™ Sealing System
•Accepts a wide variety of grommets for multi drop applications
•Permanent neoprene gasket system requires no re-entry kits
•Standard cover can be replaced with expanded to increase splice capacity
•Integrated air valve to confirm integrity of final assembly
•UL Approved, RUS Listed
•Tested in accordance to Telcordia GR-771 CORE

•Splice Capacity: Up to 288 with single fusion, 576 with mass fusion •Organizers designed for loose buffer tube and ribbon applications
•Compact size allows for mounting in smaller locations
•Provided with LOCK-TAPE Sealant System
•Accepts a wide variety of grommets for multi drop applications
•Field proven permanent neoprene gasket system
•No re-entry kits required
•Integrated air valve to confirm integrity of final assembly
•UL Approved and RUS Listed

•Fast and easy installation
•Only two components, pre-filled vial and cap with integral Insertion Ram and Bonding Connector
•Vial pre-filled with field proven POLY-BEE Sealant for maximum protection
•Octagon shaped Vial for ease of application and maximum splicing capacity
•Positive locking feature to insure proper application and to discourage re-use
•RUS Listed