industries

•Includes Two 1/2″ x 4″ Pull Slots

•Parts Include Two 3/8-7 x 3.50 Stainless Steel Auger Bolts Hex Head, as well as Two 3/8 ID x 1.000 OD Stainless Steel Flat Washer

•Highest Rated

•Meets or exceeds H20, AASHTO M309 test provisions

•Straight Wall Design is easier to remove or adjust in the field

•Skid Resistant Surface

•Includes One 1/2 x 2 Pull Slot

•Parts Include 3/8 Stainless Steel Hex Head Bolt with Two Washers

Plastic U-Guards (risers) are designed to give non-conductive, high impact protection for utility power and communication cables installed vertically on polesInstalls quickly and easilyEasily field cut to desired lengthRibbed surfaceMade of Polyethylene to allow flexibilityExcellent UV protectionU-Guard is the superior alternative to conduit riser systems and U-Guard provides savings in material cost, installation time and maintenance

Plastic U-Guards (risers) are designed to give non-conductive, high impact protection for utility power and communication cables installed vertically on polesInstalls quickly and easilyEasily field cut to desired lengthRibbed surfaceMade of Polyethylene to allow flexibilityExcellent UV protectionU-Guard is the superior alternative to conduit riser systems and U-Guard provides savings in material cost, installation time and maintenance

Air Tight Water Tight Tested to greated than 1500lbs Pull-Out Greater than 450 (psi) air pass-through

Rigid PVC plastic conduitUL listedConduit meets the requirements of the UL Sunlight-Resistant rating and is listed by UL for use in direct sunlightCan be used with 90 degree C rated conductorsConduit can be used in above ground or underground installations, including direct burial with or without concrete encasementHeat and fire-resistantCorrosion-resistantBell end

Hardened connectors are factory-terminated and environmentally sealed for use in optical drop cable deploymentsPlug-and-play adapter ports ensure rapid cable installment in the outside plant access section of the network (Plug_and_p)Multiport Service Terminals incorporate hardened connector technology that is designed to withstand the rugged outside plant environment

• Hardened connectors are factory-terminated and environmentally sealed for use in optical drop cable deployments
• Plug-and-play adapter ports ensure rapid cable installment in the outside plant access section of the network
• Multiport Service Terminals incorporate hardened connector technology that is designed to withstand the rugged outside plant environment

• Hex shape on outside of sockets can be used with a wrench to maximize torque
• 7/8” diameter impact-resistant thermoplastic handle is ergonomically designed and color-coded orange
• Thin-walled sockets access tight spaces such as locking devices on terminals and cabinets
• Total length is 7” with 1 1/4” (31.75 mm) deep sockets to fit over long binding posts
• Heat treated alloy steel sockets provide long life and durability

•In-line or butt splice capability
•Pre-formed radiuses maintain bend requirements
• Interlocking base and cover provides tray stability without the use of a bolt
• Extended finger guides easily store and route loose fiber or ribbon

• Durable, lightweight & ergonomic shears ideal for cutting Kevlar® strength fibers & aramid yarns, as well as other tough application materials including dyneema & synthetic cords
• Single micro-serrated blade reduces slippage & produces clean cuts every time
• Blades are constructed from high-carbon molybdenum & vanadium steel to ensure longevity

•Exceptional bending strength
•Durable

•Exceptional bending strength
•Durable

• Strips the 1.6-3 mm fiber jacket, 600-900 micron buffer coating, and 250 micron coating down to expose the 125 micron glass fiber
• First hole strips the fiber jacket down to the micron buffer coating
• Second hole then strips the micro buffer coating down to the micron cable
• Third hole strips the micron cable down to the glass fiber without nicks or scratches
• Angled jaw guides fiber into the 3rd hole to prevent accidental cutting of the fiber
• Safety lock allows the tool to be easily stored when not in use
• Tool is made of strong high carbon steel and handle is made of TPR (thermoplastic rubber) for longer life and greater comfort

NEMA Rated Junction Box Cast Iron BoxGalvanized Cover, 18″ x 12″ x 6″

Excellent Friction Reduction For low cable pulling tensionClean and Non-Staining Minimizes clean-up timeField-Friendly Application Can be pumped, hand applied, or distributed by Front End Pack Temperature Stable No ruined lubricant from freeze/thaw or high-temperature exposureHigh Cling Factor Stays on cable jacket during application

• Easy working in confined areas
• Short jaws and beveled cutting edges permit close cutting of wire
• Induction-hardened cutting knives for long life
• Hot-riveted joint ensures smooth action and no handle wobble
• Plastic-dipped handles for comfort and ease of identification
• Custom, US-made tool steel
• Type : Diagonal Cutting Pliers
• Application : Cutting
• Overall Length : 6.125” (15.6 cm)
• Material : Steel
• Nose Type : Tapered
• Jaw Length : 0.813” (2.1 cm)
• Jaw Width : 0.688” (1.8 cm)
• Jaw Thickness : 0.813” (2.1 cm)
• Jaw Capacity : 0.5” (1.3 cm)
• Joint Type : Hot Riveted
• Handle Color : Red
• Handle Finish : Plastic-Dipped
• Handle Length : 4.938” (12.5 cm)
• Weight : 0.3 oz (132 g)

• Multipurpose: One cleaning solvent for electrical applications
• High Solvency: Excellent for cable splice preparation and electrical equipment cleaning.
• No Residue: Type HP evaporates completely, leaving no residue.
• Non-Conductive: Will not short across typical electrical voltages.
• Safe: Replaces chlorinated electrical cleaners. No carcinogens.

Radii listed are available and larger radii can be suppliedAll elbows are supplied with plain endsFor installations with other conduit systems, we offer an assortment of transition and termination fittings that can be installed on our elbows