industries

Section of PVC Schedule 40 conduit which as been heated and bent to effect a 90°Both ends are solvent weldCan be used above ground or buried and is suitable for concrete encasement

Section of PVC Schedule 40 conduit which as been heated and bent to effect a 90°Both ends of the bend are spigot (plain) endBoth ends are solvent weldCan be used above ground or buried and is suitable for concrete encasement

Made of rugged PVCThe end bell is used in concrete vault walls to provide a smooth, safe entrance to the conduit outsideEasy installationProtects wiringMeets NEMA TC9 requirementsMade in the United States

Enclosure Type: Wall Mountable
Dimensions (HxWxD): 6.125 in. x 5.56 in. x 1.125 in.
Material: 16 gauge steel with black electrostatic polyester powder coat paint
Capacity: 1 LGX adapter panel (purchased separately)
Fiber Count: Max. 24 (24 LC, 12 SC or ST)
Includes: 1 splice chip, 2 rubber cable entry grommets, 4 zip ties, 4 cable management clips, 1 warning label, 1 port identification label

Category 6 Data Cable
23 AWG 4 Twisted Pair Solid Bare Copper
CMR Rated for Riser Applications
550 Mhz Bandwith
1,000 ft Pull Box

Used for guying utility polesUsed with all types of expanding anchorsContoured to prevent damage to strand3-1/2″ minimum thread length on all rodsMinimum tensile strength is 16,000 lbsA heavy square nut is attached to every anchor rodHot dip galvanized to meet ASTM Specification A123

Section of PVC Schedule 40 conduit which as been heated and bent to effect a 90°Both ends of the bend are spigot (plain) endBoth ends are solvent weldCan be used above ground or buried and is suitable for concrete encasement

1-pass valve for bold, bright, visible markingNon-clogging spray tipFast-drying formula penetrates and adheres to hot, colored or wet surfacesVOC and MIR compliantLead free

1-pass valve for bold, bright, visible markingNon-clogging spray tipFast-drying formula penetrates and adheres to hot, colored or wet surfacesVOC and MIR compliantLead free

Comes as a kit for convienceCan be used on multiple models

• Material is Rigid PVC
• Neoprene gasket with zinc plated steel screws
• NEMA Rating for Types 1, 3. 3S, 4, 4X, 5, 6, and 6p
• UL Listed
• Marine listed
• Made in USA

• Non-metallic PVC construction won’t rust, corrode, chip or fade. Internal components are protected from floods, fires, and wind-blown dust and debris
• Fiber organizer backboards accommodate all commonly used fiber splice trays with a 4”x9” footprint, 10” diameter and larger peds also accept 4”x12” or 6”x15” trays
• Two-piece expanded-capacity “split” base makes it easy for technicians to place the pedestal over conduit-fed cable bundles, and are an ideal solution for rehabilitating metallic enclosures*
• Bonding/grounding bar meets all RDUP requirements for bonding and grounding of service wires and cable sheaths
• Lift-off dome provides 360º access to internal splicing area
• Dome attaches securely to the base using a self-locking 216-hex head bolt lock
• Vault mount base available

• Designed to house and protect small to large pair count terminations and splices
• Non-metallic, lightweight PVC?construction resists corrosion, impact, fire, floods, chemicals and insects
• Rigid, non-conductive splice bracket easily secures to rail mounting system in pedestal base
• BD5 and BD7 pedestals include a third bracket leg on the splice bracket for increased stability and support of heavy loads
• Offset ladder bars provide extra splicing capacity and are repositionable for added convenience
• 5-post metal grounding bar with ground lug designed to meet all industry?grounding requirements (BD 2 has 2-post metal grounding bar)
• Drop wire channel facilitates wire management
• Lift-off dome allows 360º access to internal areas

• Designed to house and protect small to large pair count terminations and splices
• Non-metallic, lightweight PVC?construction resists corrosion, impact, fire, floods, chemicals and insects
• Rigid, non-conductive splice bracket easily secures to rail mounting system in pedestal base
• BD5 and BD7 pedestals include a third bracket leg on the splice bracket for increased stability and support of heavy loads
• Offset ladder bars provide extra splicing capacity and are repositionable for added convenience
• 5-post metal grounding bar with ground lug designed to meet all industry?grounding requirements (BD 2 has 2-post metal grounding bar)
• Drop wire channel facilitates wire management
• Lift-off dome allows 360º access to internal areas

• Designed to house and protect small to large pair count terminations and splices
• Non-metallic, lightweight PVC?construction resists corrosion, impact, fire, floods, chemicals and insects
• Rigid, non-conductive splice bracket easily secures to rail mounting system in pedestal base
• BD5 and BD7 pedestals include a third bracket leg on the splice bracket for increased stability and support of heavy loads
• Offset ladder bars provide extra splicing capacity and are repositionable for added convenience
• 5-post metal grounding bar with ground lug designed to meet all industry?grounding requirements (BD 2 has 2-post metal grounding bar)
• Drop wire channel facilitates wire management
• Lift-off dome allows 360º access to internal areas

Made of rugged PVCThe end bell is used in concrete vault walls to provide a smooth, safe entrance to the conduit outsideEasy installationProtects wiringMeets NEMA TC9 requirementsMade in the United States

Made of rugged PVCThe end bell is used in concrete vault walls to provide a smooth, safe entrance to the conduit outsideEasy installationProtects wiringMeets NEMA TC9 requirementsMade in the United States

Made of rugged PVCThe end bell is used in concrete vault walls to provide a smooth, safe entrance to the conduit outsideEasy installationProtects wiringMeets NEMA TC9 requirementsMade in the United States

Size: 2-3/16 Inch Length x 2-5/8 Inch WidthCan also be used to connect PVC conduit to a box or other threaded body with the use of a lock nutMade of rigid PVC for added durability and flexibilityHas a male connection with the fitting that consists of one solvent weld female end and one threaded male endIdeally used for transition from plain end PVC conduit to threaded metal/PVC female bellTerminal adapter is UL listed, CSA certified and NEMA rated

Size: 2-3/16 Inch Length x 2-5/8 Inch WidthCan also be used to connect PVC conduit to a box or other threaded body with the use of a lock nutMade of rigid PVC for added durability and flexibilityHas a male connection with the fitting that consists of one solvent weld female end and one threaded male endIdeally used for transition from plain end PVC conduit to threaded metal/PVC female bellTerminal adapter is UL listed, CSA certified and NEMA rated