industries

Rigid PVC plastic conduitUL listedConduit meets the requirements of the UL Sunlight-Resistant rating and is listed by UL for use in direct sunlightCan be used with 90 degree C rated conductorsConduit can be used in above ground or underground installations, including direct burial with or without concrete encasementHeat and fire-resistantCorrosion-resistantBell end

Rigid PVC plastic conduitUL listedConduit meets the requirements of the UL Sunlight-Resistant rating and is listed by UL for use in direct sunlightCan be used with 90 degree C rated conductorsConduit can be used in above ground or underground installations, including direct burial with or without concrete encasementHeat and fire-resistantCorrosion-resistantBell end

Rigid PVC plastic conduitUL listedConduit meets the requirements of the UL Sunlight-Resistant rating and is listed by UL for use in direct sunlightCan be used with 90 degree C rated conductorsConduit can be used in above ground or underground installations, including direct burial with or without concrete encasementHeat and fire-resistantCorrosion-resistantBell end

Rigid PVC plastic conduitUL listedConduit meets the requirements of the UL Sunlight-Resistant rating and is listed by UL for use in direct sunlightCan be used with 90 degree C rated conductorsConduit can be used in above ground or underground installations, including direct burial with or without concrete encasementHeat and fire-resistantCorrosion-resistantBell end

IMSA Specification 50-2 Loop Lead-In Cable
14 AWG 2 Cond Stranded Tinned Copper
For 600 Voltage Power Transmission
2500 ft Reel

Machine bolt for handing aerial strand and accessories on utility poles5/8″ dia. x 14″ long with 6″ thread lengh and cone pointIncludes one square nutRated tensile strengh 12,400 lbsHot dip galvanized per ASTM A-153These are often referred to as crossarm or through bolts.

IMSA Specification 20-1 Traffic Signal Cable
14 AWG 21 Cond Solid Bare Copper
For 600 Voltage Power Transmission
Traffic Signal, Traffic Control Systems, Conduit and Aerial Applications
1000 ft Reel

IMSA Specification 20-1 Traffic Signal Cable
14 AWG 15 Cond Solid Bare Copper
For 600 Voltage Power Transmission
Traffic Signal, Traffic Control Systems, Conduit and Aerial Applications
2500 ft Reel

IMSA Specification 20-1 Traffic Signal Cable
14 AWG 12 Cond Solid Bare Copper
For 600 Voltage Power Transmission
Traffic Signal, Traffic Control Systems, Conduit and Aerial Applications
2500 ft Reel

Regular square nut for 5/8″ diameter bolt with 5/8-11-UNC threadsHot dip galvanized per ASTM A-153Manufactured in compliance with ANSI C135.1Considered safest to use by utility linemenLarge wrenching surfaceUsed on all types of threaded bolts and insulator pins

IMSA Specification 20-1 Traffic Signal Cable
14 AWG 5 Cond Solid Bare Copper
For 600 Voltage Power Transmission
Traffic Signal, Traffic Control Systems, Conduit and Aerial Applications
2500 ft Reel

Low VOC cement contain chemicals which dissolve the surface of the PVC and softensCement is to be applied while the primer is still wet Ideally designed for use with PVC conduit through 6 inches diameterCan be used in 40 deg F and higher ambient temperatures with 67 deg boiling point

Section of PVC Schedule 40 conduit which as been heated and bent to effect a 90°Both ends are solvent weldCan be used above ground or buried and is suitable for concrete encasement

Section of PVC Schedule 40 conduit which as been heated and bent to effect a 90°Both ends are solvent weldCan be used above ground or buried and is suitable for concrete encasement

Section of PVC Schedule 40 conduit which as been heated and bent to effect a 90°Both ends are solvent weldCan be used above ground or buried and is suitable for concrete encasement

Section of PVC Schedule 40 conduit which as been heated and bent to effect a 90°Both ends are solvent weldCan be used above ground or buried and is suitable for concrete encasement

Features:Thimble Eye5/8″ x 10″AngledIncludes regular square nutStd pkg 20, Price ea

Used for dead-ending and attaching guy wires to poles and crossarmsSupplied with cone point to ease assembly with nutSupplied with an attached square nutHot dip galvanized to meet ASTM Specifications F2329Minimum thread length is 4″Recommended torque value: 73 ft lb. Minimum Tensile Strength: 13,550 lb.

Section of PVC Schedule 40 conduit which as been heated and bent to effect a 90°Both ends are solvent weldCan be used above ground or buried and is suitable for concrete encasement

Section of PVC Schedule 40 conduit which as been heated and bent to effect a 90°Both ends of the bend are spigot (plain) endBoth ends are solvent weldCan be used above ground or buried and is suitable for concrete encasement