Fiber Optic Splice Closures (2851 Products)
Dust/dirt cover protects inner contents from disturbance Flexible nature allows for easy installation Excellent stay ability Soft material cushions cable ends
Unique design strips 250-micron buffer to expose 125-micron optical fiber without damaging the fiberBlades are ground and hardened for even longer lifeErgonomic plastic-dipped handles are comfortable and easy to use
Always use on the cable infeed side. Collet and guide used together for this size cable. Exit Side Part Number: 910-110113
•Fits COYOTE DTC8
•12 Fiber splice capacity
Used for dead-ending and attaching guy wires to poles and crossarmsAllied Bolt marking (ABI) appears on each boltSupplied with cone point to ease assembly with nutSupplied with an attached square nutHot dip galvanized to meet ASTM Specifications F2329Minimum thread length is 6″ Recommended torque value: 130 ft lb. Minimum Tensile Strength: 20,050 lbf.
Used for dead-ending and attaching guy wires to poles and crossarmsAllied Bolt marking (ABI) appears on each boltSupplied with cone point to ease assembly with nutSupplied with an attached square nutHot dip galvanized to meet ASTM Specifications F2329Minimum thread length is 6″ Recommended torque value: 130 ft lb. Minimum Tensile Strength: 20,050 lbf.
Constructed of high quality steel, hot-dip galvanizedCone points permit easy driving without damage to threadsBolts are supplied with one square nut assembled20,050 Lbs. minimum tensile strength
Used for down and span guysConstructed of ductile iron, hot dip galvanized per ASTM A153Features smooth grooves to eliminate chafing of the strandAccepts a wide range of strand diametersCommon industry slang is Ram’s Head or Goat Hook.
Regular square nut for 3/4″ diamter bolt with 3/4-10-UNC threadsHot dip galvanized per ASTM A-153Manufactured in compliance with ANSI C135.1.
•Fits 6.5″x22″ COYOTE Dome, 9.5″x28″ COYOTE Dome, 6.5″x22″ COYOTE Closure, 8.5″x22″ COYOTE Closure, 6.5″x22″ COYOTE Splice Case, 8″x28″ COYOTE Splice Case and 9.5″x28″ COYOTE Splice Case
•Trays are injection-molded with a hinged, clear plastic cover for maximum fiber protection
•Clear plastic cover allows for visible inspection of the fibers
•A series of tabs along the tray perimeter are easily removed to simplify routing of the fiber.
Easy assembly/disassembly, no tools required, low profile design Provide an air and water tight connection Designed and tested to meet or exceed
industry standards Color coded to easily identify by size Specially designed to ensure a smooth interior
transition Withstand chemical and harsh environment
conditions
• Included blade cartridge (UST-225) provides a 2-level strip for F, BNC, and RCA connector termination
• High carbon steel blades last over 5,000 strips
• Cable stop on both sides of the cartridge ensures precise stripping without need to make adjustments
• Cartridge is reversible for ambidextrous use
• Hook and Loop strip on bottom of the tool folds back the braided shield on the cable with ease
• Large finger loop provides smooth rotation during use
• Stripping action removes 1/4″ of jacket and 5/16″ of shield and dielectric, which exposes the center conductor
• Security wrench fits all metal 7/16” hex “F” fittings
• Lightweight body is made of aluminum for high durability
• Security socket is made of hardened steel for longer life
• Anodized blue for easy identification and added protection
UV resistant materials contain an inhibitor which prolongs the life of the tie in outdoor environmentsOne-piece design reduces installation timeOutside serrations prevent cable damage
• High-visibility orange body is easy to see on conduit and at the jobsite
• Large, easy-to-read high-visibility vials at 3 angles: level, 90 and 45 degrees
• Large top-view vial windows enable easy readability from multiple angles
• Magnetic bottom holds securely to conduit and metal surfaces
• V-Groove fits contour of conduit and pipe
• Tapered nose easily pushes into pockets
• 1.25 mm LC adapter tip kit
• For use on EXFO FIP-400 Series
Stainless steel resists chemicals, salts, heat, cold, moisture, UV light and high temperaturesSecure outdoor signs, bundle cables and create custom clamps for hoses and duct workUse with Tensioner and Seals
Same collet used on both infeed and exit side.Includes 1 upper and lower collet.Manufacturer recommends 2 sets of collets to fit infeed and exit side.
525+ cleaning engagements per unitAnti-static system produces pristine endface and minimizes contaminant attractionCleans cable assembly in hand as well as cables behind panelNon-fraying cloth designSimple push to clean action