Pedestals (2851 Products)
• Identification plate feature allows bundles to be easily marked and identified.
• Wire and cable harnesses can be secured and identified using just one product, which saves time.
• Plates can be marked manually with a permanent marker or with a pre-printed adhesive label.
Installed with anchor wrenchAnchor has curvilinear leading edges to help penetrate rocky soils and to reduce damage during installation1″ threads to fit 3/4″ and 1″ diameter Pisa rodAnchors are painted with a black paint6,000 ft-lb torque ratingDoes not include the Anchor Rod
• Engineered and manufactured for maximum performance and quality.
• Made from 100% high-quality plastic to ensure efficient recycling.
• Inside serration for a strong grip onto bundles.
• Easy application either manually or with a tensioning tool.
• Bent tail allows for simpler insertion.
• Engineered and manufactured for maximum performance and quality• Made from 100% high-quality plastic to ensure efficient recycling.
• Inside serration for a strong grip onto bundles• Easy application either manually or with a tensioning tool• Bent tail allows for simpler insertion
• Fiber optic cleaning swabs for 2.5mm connectors, SC, ST, FC, ASC, AFC, etc.
• Each uses a patented, thermally-sintered polymer tip which cleans the entire end-face
• Conforms to end-face geometry
• No fibers, glues, out-gassing or blowing agents
• Packaged 50 CleanStixx/box
• Store in a cool, dry environment that is out of direct sunlight
Used as a heavy-duty anchor in solid rockAnchor consists of two Malleable castings and a Triple Eye Anchor RodAll components are hot dip galvanized to meet ASTM Specification A153To install anchor, drill a 12″ deep hole in solid rock, put anchor in hole, turn rod until anchor expands and wedges in the holeAnchor diameter is 1-3/4″Anchor size expanded is 2-3/8″Hole diameter is 1-7/8″The harder the pull on the rod, the tighter it wedges into the rockUltimate strength is 23,000 lbs
UV resistant materials contain an inhibitor which prolongs the life of the tie in outdoor environmentsOne-piece design reduces installation timeOutside serrations prevent cable damage
Installs quickly and easily with EMC’s U-Guard Fasteners.Easily field cut to desired length.Ribbed surface.Sizes: 1″-6″ Lengths of 5′,8′ and 10′.Belled end on 2″ through 6″ provides for overlap on adjacent sections.Excellent UV protection.
Mixer tip9″ long One tip is included with each cartridge ordered
Polyethylene inner jacket Provides additional mechanical
and moisture protectionCorrugated armor Gopher resistant Provides excellent
mechanical protection Polyethylene outer jacket Provides tough, flexible,
protective covering that
withstands exposure to sunlight,
atmospheric temperatures,
ground chemicals and stresses
expected in standard installations
• Small package footprint ideal for laboratory and field use
• Rugged 90-wipe mini-tub keeps wipes clean and dry prior to use
• Hexagonal cover minimizes rolling distance when dropped
• Solvent safe – wipes may be moistened to provide wet / dry cleaning
• Instructions for use on the side of the tub
• Excellent Solvency: dust, and other contaminants
• 99.8% Anhydrous Isopropyl: Water-free for fiber optic cleaning
• Large Cleaning Wipe: means longer working time and more cleaning per wipe
• No Residue: No interference with light transmission
• Fast Evaporating: before continuing with job
Air Tight Water Tight Tested to greated than 1500lbs Pull-Out Greater than 450 (psi) air pass-through
Electrofusion Couplers provide an ideal method to make a fusion weldAll that is required is an electrofusion processor, the electrofusion couplings, and a scraper toolThe fittings are made of polyethylene with heating coils located at the surfaceThis design allows direct heating of the interface between the pipe and the fittingNo allignement or clamping tools necessary
• Fits any cable.
• Can be used on either lead or plastic-sheath types.
• Will not move, even in a floating bond.
• “No-turn” head eliminates static.
• Hardened connectors are factory-terminated and environmentally sealed for use in optical drop cable deployments
• Hardened drop cables incorporate hardened connector technology that is designed to withstand the rugged outside plant environment • Hardened drop cables simplify installation and maintenance by reducing splicing requirements in the distribution portion of the network
No. of Rack Spaces: 2U
Enclosure Type: Rack Mountable (fits standard 19 in. rack)
Dimensions (HxWxD): 3.5in. x 19in. x 14in.
Material: 16 gauge steel with black electrostatic polyester powder coat paint
Capacity: 6 LGX adapter panels (purchased separately)
Fiber Count: Max. 144 (144 LC, 72 SC or ST)
Includes: 4 sexy blue half-moon cable managers, 6 nylon fiber management loops, 8 Velcro tie downs, M6 screws and cage nuts4 zip ties, 2 port identification labels, and 1 ground lug kit
Modular design
Includes 12 fiber splice tray kit for on site conversion to patch and splice panel
Acommodates up to 3 LGX118 compatible adapter plates and modules
Slide-out tray with relief cut-outs for simplified connector access
Aluminum construction per ASTMB209
Durable black textured powder coat finish
Dimensions: 13.51? x 17.00? x 1.75?
• Locking Lid
• Metal Plate
• Hot-stamped Graphics
• For use with FOD-2000 Model from Jonard Tools