Manufactured from one-piece rigid PVC for durabilityFemale connector type at both ends should seat at the stop for proper positioningUsed to couple lengths of conduit pipeCoupling has a trade size of 4 Inch and measures 4 3/16 Inch x 4 1/2 Inch inner diameter x 5 outer diameterCoupling meets UL651, CSA certification, NEMA TC3, UL file E81590 standards.
Manufactured from one-piece rigid PVC for durabilityFemale connector type at both ends should seat at the stop for proper positioningUsed to couple lengths of conduit pipeCoupling has a trade size of 4 Inch and measures 4 3/16 Inch x 4 1/2 Inch inner diameter x 5 outer diameterCoupling meets UL651, CSA certification, NEMA TC3, UL file E81590 standards.
Non-toxic, odorless & tastelessNot UV resistantNot for use with compressed air or gasTemperature range: 33°F to 140°FNSF 61 certifiedMade in the USA
Manufactured from one-piece rigid PVC for durabilityFemale connector type at both endsCoupling has a trade size of .75 Inch and measures 1 9/16 Inch x 1 1/16 Inch inner diameter x 1 5/16 outer diameterCoupling meets UL651, CSA certification, NEMA TC3, UL file E81590 standards
Used for securing up to 3 guy wires at a utility poleAnchors are installed by simply turning anchor into groundNo Wrench Anchors may be driven by hand or with power equipmentEye dimensions are the same as Anchor RodsScrew anchors consist of an unthreaded triple eye rod with an angled point, and a firmly welded helixHot dip galvanized to meet ASTM Specification A123Holding strength per soil class for 3/4″ rod:Soil Class 5: 4500 lbsSoil Class 6: 3000 lbsSoil Class 7: 1500 lbsTypical working torque is 400 ft lbs
Section of PVC Schedule 40 conduit which as been heated and bent to effect a 90°Both ends are solvent weldCan be used above ground or buried and is suitable for concrete encasement
Section of PVC Schedule 40 conduit which as been heated and bent to effect a 90°Both ends are solvent weldCan be used above ground or buried and is suitable for concrete encasement
Section of PVC Schedule 40 conduit which as been heated and bent to effect a 90°Both ends are solvent weldCan be used above ground or buried and is suitable for concrete encasement
Section of PVC Schedule 40 conduit which as been heated and bent to effect a 90°Both ends are solvent weldCan be used above ground or buried and is suitable for concrete encasement
Section of PVC Schedule 40 conduit which as been heated and bent to effect a 90°Both ends are solvent weldCan be used above ground or buried and is suitable for concrete encasement
Section of PVC Schedule 40 conduit which as been heated and bent to effect a 90°Both ends are solvent weldCan be used above ground or buried and is suitable for concrete encasement
Section of PVC Schedule 40 conduit which as been heated and bent to effect a 90°Both ends are solvent weldCan be used above ground or buried and is suitable for concrete encasement
Section of PVC Schedule 40 conduit which as been heated and bent to effect a 90°Both ends are solvent weldCan be used above ground or buried and is suitable for concrete encasement
Section of PVC Schedule 40 conduit which as been heated and bent to effect a 90°Both ends are solvent weldCan be used above ground or buried and is suitable for concrete encasement
Section of PVC Schedule 40 conduit which as been heated and bent to effect a 90°Both ends are solvent weldCan be used above ground or buried and is suitable for concrete encasement
Rigid PVC plastic conduitUL listedConduit meets the requirements of the UL Sunlight-Resistant rating and is listed by UL for use in direct sunlightCan be used with 90 degree C rated conductorsConduit can be used in above ground or underground installations, including direct burial with or without concrete encasementHeat and fire-resistantCorrosion-resistantBell end
Rigid PVC plastic conduitUL listedConduit meets the requirements of the UL Sunlight-Resistant rating and is listed by UL for use in direct sunlightCan be used with 90 degree C rated conductorsConduit can be used in above ground or underground installations, including direct burial with or without concrete encasementHeat and fire-resistantCorrosion-resistantBell end
The Electrical Materials Company steel flanged “U” Guards™ are manufactured from 14 gauge steel.Our steel pole risers are available painted, flanged, unflanged, in and in lengths of 5’, 8’, and 10’Designed to fit with our full range of Adapter Boots and Plastic U-Guards™. Our flanged Steel U-Guard™ installs quickly with EMC U-Guard™ Fasteners.
Steel flanged “U” Guards™ are manufactured from 14 gauge steel, with the maximum weight of hot dip galvanizing to be compatible with the life expectancy of standard pole line hardware.Designed to fit with our full range of Adapter Boots and Plastic U-Guards™Our flanged Steel U-Guard™ installs quickly with EMC U-Guard™ FastenersSteel U-Guards™ are part of a low cost alternative to expensive conduit systems
Snap together for fast secure field assembly Only base and intermediate are needed so no banding is necessaryLock firmly together preventing seperation
ABSTRAP Spacer, Stackable, 1/2″ Cable Spacer, Std Pack Qty. 100, Priced per Ea
