Drop cables Broadband network Local loop Fiber to the premise Universal design for aerial or direct bury Dielectric to eliminate bonding and grounding PFM non-sticky gel reduces installation time and labor costDielectric rods create an excellent crush resistanceLength marks are printed in both sequential feet and meters eliminate the need for length conversion
Can accomodate Single or double wrap bands Hammer down wings to close sealStainless steel wing seal for use with Uline Stainless Steel Strapping and Tensioner.Fits Strapping width 3/4″ Type 201 Stainless Steel
Used for dead-ending and guying from the threaded ends of crossarm boltsRated to support a 22,000 lb. loadForged from AISI 1018 SteelHot dip galvanized to meet ASTM Specification A153
Used in conjunction with stainless strapping to secure bandStamped from Type 201 Stainless Steel Width: 3/4″Tensile Strength: 95,000 PSI Minumum
201 Stainless Steel offers good resistance to oxidation and many moderate corrosive agentsUtilized in general use banding applicationsCan be used with clip style buckles to create band clampsBanding is available in standard 100-foot lengthsAverage breaking strength is 2,250 lbsStrapping easily accessed from dispensing case
Used in conjunction with heavy-duty strapping to secure bandingBuckles are available in Type 201 Stainless SteelIt is recommended to double-wrap strapping in heavy-duty applicationsThickness .095″
• Tin-plated copper connector with internal self-cutting threads, for terminating solid wires at connecting points.
• These small terminals are applied with a can wrench. They cut their own thread on solid #6 or #10 AWG copper ground wire.
One Piece, Conduit Size 1 InPVC, Dia. 1.50 InOverall Length 2.05 InFor Use With Shedule 40 and Schedule 80 PVC ConduitStandards UL
• Center stop to help determine proper depth of connection
• For use aboveground and underground and non-conductive and sunlight resistant
• Meets NEMA TC-3 Standards
• UL listed
One Piece, Conduit Size 2 InPVC, Dia. 2.75 InOverall Length 2.55 InShedule 40 and Schedule 80 PVC Conduit, Standards UL
•Ideal for above ground marking
•Come in multiple sizes and colors
•Used in multiple industries
Coupling, One Piece, Conduit Size 5″Material: PVC Diameter: 5.06 In. Overall Length: 4.43″For Use With Schedule 40 and Schedule 80 PVC ConduitUL Listed
A pole attachment with center hole that is mounted with a 5/8″ suspension bolt to accept guy grips and Strand Dead-endsHot dip galvanized to meet ASTM Specification A153Used for cable runs at angles ranging from 35 to 60Back is curved with integral spurs for stability on poleCasted from Ductile Iron for superior strengthUltimate tensile strength at 45 is 9,000 lbs.
Used for securing up to 3 guy wires at a utility poleAnchors are installed by simply turning anchor into ground. No Wrench Anchors may be driven by hand or with power equipmentEye dimensions are the same as Anchor RodsScrew anchors consist of an unthreaded triple eye rod with an angled point, and a firmly welded helixHot dip galvanized to meet ASTM Specification A123Holding strength per soil class for 1-1/4″ rod:Soil Class 5: 13000 lbsSoil Class 6: 10000 lbsSoil Class 7: 7000 lbsTypical working torque is 2300 ft lbs
Full-thread double-arming bolt, 5/8″ dia. x 10″ long with cone pointed endsIncludes four square nutsRated tensile stength is 12,400 lbsGalvanized per ASTM A-153Manufactured in compliance with ANSI C135.1 and CAO 6645.
Constructed of high quality steel, hot-dip galvanizedCone points permit easy driving without damage to threadsBolts are supplied with four square nuts assembled13,500 Lbs. minimum tensile strength
Constructed of high quality steel, hot-dip galvanizedCone points permit easy driving without damage to threadsBolts are supplied with four square nuts assembled13,500 Lbs. minimum tensile strength
ABSTRAP Spacer, Stackable, 1/2″ Cable Spacer, Std Pack Qty. 100, Priced per Ea
