Search Results for: – Page 2

EXFO FTB Launch Test Cable for SC/APC to LC/UPC with Soft Suppressor Bag, 500 m

• Installation/troubleshooting/OTDR testing essential
• Increase the life of the OTDR connector by reducing the number of matings on the OTDR connector
• Singlemode and multimode fi ber models
• Wide selection of connectors for quick connection to most
• OTDR and patch panel ports
• Modular FTB-LTC, portable SPSB and stand-alone PSB: available in lengths of 15, 150, 300, 500, 1000 and 2200 m
• Contiguous fi ber design for the most accurate connector loss

Cable Ties, UV Stabilized, 8″, 50# Tensile Strength, Black,

• UV stabilized cable ties contain an inhibitor which prolongs the life of the tie in UV exposures.
• Inside serrations allow for strong grip on cables and wire bundles.
• Head design provides high tensile strength with very low insertion force.
• Bent tail ensures a quick and simple installation.

Cable Ties, UV Stabilized, 15″, 50# Tensile Strength, Black,

Fiber Optic Distribution Frame

For use with LSX panels
Front Access
Height: 84 in
Width: 2.992 in
Depth: 12.008 in

5/8″ Raised Floor Mounting Kit

Used with FDF-style frames only
Threaded rod included

Quick Mount Premise Enclosure

• Self-latching, hinged cover design snaps closed: with padlock and F-terminator security.
• Optimize space and cost.
• Quick mount rails enable True Flex devices to be snapped into place.
• Continuous bosses for flexible component placement.
• Cable retention slots allow work to be completed outside of the box.

FIBRBox Pedestal Mounting Kit

• Universal mounting bracket for mounting onto flat surface or pole
• Standard package: 10

FIBRBox, Narrow B Box, Fits most 8″ Pedestals

• Mounts in pedestals, on a wall, or on a pole (can be used in most 8, 10
or 12 inch pedestals). A variety of adapter brackets are sold separately
(see accessories list)
• Overall dimensions (not including bus bar and mounting tabs):
Standard (10”, 12” pedestals) 18.3” x 8.6” x 4.2”
(H x W x D), Narrow (8” pedestals) 18.3” x 6.3” x 4.2”
• Accommodates up to .86” diameter main cables
• Buffer tube storage for up to 96 fiber cable
• Splice capacity: 96 single splices for the standard design and 120 single
splices for the narrow design; both designs accommodate 288 mass
fusion splices
• Accommodates up to 4 CommScope FOSC splice trays or OC splitters
for distributed PON solutions on standard design, and 5 FOSC splice
trays on narrow design
• Independent cable strain relief and strength member tie-downs
• Common cable grounding outside the splice area
• Ground block for use on tone-able drop applications
• Gasket sealed door
• Grommet/gasket cable entry points
• Removable door with security screw

CleanWipes® Optical Grade Dry Wipe

• A portable tool for the high-speed fiber cleaning in the field
• Uses a static-dissipative fabric that will not tear or shred even when cleaning LC connectors
• Very soft; will not scratch end-faces
• Color-coded slots eliminate cross-contamination
• 400-800 perfect cleanings/box
• Unlimited shelf life
• Store in a cool, dry environment that is out of direct sunlight

Flex Clip™ Cable Attachment Device For Series 7 & 11 Cable

• Durable and long lasting
• Flexible material won’t damage cable
• UV-stabilized for use indoors or out
• Combo hex-head screw for use with a flat bladed or phillips screwdriver

LC Simplex Adapter, Beige

LC style adapters are used in high density applications and feature a quick plug in installation.
Adapters are available in both simplex and duplex designs and utilize high quality zirconia and phosphorous bronze sleeves.
Adapter has a ceramic insert.

14mm MicroDuct End Caps, Clear w/ Green

For MicroDuctUsed to seal an open tubePrevents dirt or water entry

Jonard Tools® Fiber Optic Mid Span Slit & Ring Tool Kit

The TK-105 Fiber Optic Mid Span Slitting & Ringing Tool Kit provides an array of tools designed to provide easy access to fiber optic cables and buffer tubesMS-306 Mid Span Slit & Ring Tool (1.2 – 3.3 mm) MS-316 Mid Span Slit & Ring Tool (2.9 – 6.8 mm) MS-326 Mid Span Slit & Ring Tool (5 – 10 mm) FOD-2000 Fiber Optic Drop Cable Slitter CSR-1575 Fiber Optic Cable Slit & Ring Tool H-20 Rugged Nylon Carrying Case

10 dB, LC/UPC Fiber Optic Attenuator, Male to Female

• An attenuator is a device that is used to reduce the power level of an optical signal within fiber optic cable.
• This allows the power level to remain within the limits of the receiver’s detector otherwise it would overload the detector and it will not be able to communicate.
• Attenuators are available in different decibels.

Surface Mount, 4-Port, No Jack, White

• Universal Surface Mount Box
• 4-Port
• No Jack
• Fits most CAT3, CAT5E, CAT6, CAT6A jacks
• Available in Almond, Ivory or White
• Two piece construction
• Double-sided tape, screws and ties included
• UL Listed, RoHS Compliant
• 50 per bag (can be bought individually)

Horizontal Wire Manager, 1U

Height: 1.75″
Width: 19″
Depth: 3″
Durable black powder coated finish
Brackets accomodate 19? patch panels
Accepts 10/24 or 12/32 screws
Mounts on any standard 19? rack or wall mount

RealFlex® Preconnectorized Drop Cable, Optitap (SC/APC) to SC.APC, Flat Dielectric, 250′

â€¢ Hardened connectors are factory-terminated and environmentally sealed for use in optical drop cable deployments
â€¢ Hardened drop cables incorporate hardened connector technology that is designed to withstand the rugged outside plant environment
â€¢ Hardened drop cables simplify installation and maintenance by reducing splicing requirements in the distribution portion of the network

Primex Fiber Keystone with Auto-Shutter

• Accommodates SC/APC or SC/UPC fiber for universal requirements.
• Compatible with most patch panels, surface mount boxes and faceplates.
• Auto-Shutter shields eye against exposure to light emittance and keeps dust out.
• Low insertion loss.
• Low back reflection loss.
• Standards: UL 1863 Safety listed, UL 94V-O flammability standard, TIA-568-C.3

Splice Tray for FPX Pannels, 48ct Single

•The tray is used to hold the splices in a fiber closure.
•Trays accommodate 48 single fusion splices.
•For FPX series fiber panels

1/2″ x 8′ Ground Wire Molding

Plastic U-Guards (risers) are designed to give non-conductive, high impact protection for utility power and communication cables installed vertically on polesInstalls quickly and easilyEasily field cut to desired lengthRibbed surfaceMade of Polyethylene to allow flexibilityExcellent UV protectionU-Guard is the superior alternative to conduit riser systems and U-Guard provides savings in material cost, installation time and maintenance

Cart