GMP offers you a choice of several lightweight aluminum alloy units that mount on a standard 2 7/16 in. (62mm) diameter drive shaft with either a bayonet or a cross pin type of connection. These capstans can be used as end pullers or mid-assist booster pullers that will allow long, straight-through, splice-free pulls. Offered with a torque limiter between the drive spindle and the inner hub, factory set at standard 600 pounds-force (2669 N-force), but may be calibrated to other torque values if requested. Also available with a steel shaft and no torque limiter for no-slip applications with a maximum rated load of 1500 lbs. (6672 N). Can also be used with Fiber Optic Cable Blowers to place longer lengths of cable without splicing.