No products in the cart.
PULLERS
PULLERS
Pulling fiber is generally the best option when you’re laying fiber across a shorter distance. Pullers even take up a smaller footprint, making them ideal for working in restrictive work spaces. Choose from a selection of pullers from industry-leading manufacturers to complete short straight runs of just a few hundred feet. One of our equipment experts can help you find the right puller for your project and budget.
Available Equipment
GMP eCapstan
- Pull 15,000 ft of fiber on a single battery charge*
- Quiet operation improves job site communication and safety
- One person operation
- Adjustable pulling force and speed with ability to reverse pull
- Work earlier or later with less concern over noise ordinances
- Electronically controlled pulling setpoints from 0-800+ lbs
GMP HYDRAULIC CABLE PULLER
- Adjustable pull control, up to 1000 lbs. maximum on a 40 in. diameter capstan
- Control panel with pressure gauge, pressure adjustment knob and directional foot control valve
- Three versatile setup options are available: Self-Support, Vehicle Receiver Mount and Socket Mount
- Speeds up to 425 ft/min @ 15 gpm flow
- 1/2 in. (12.7mm) non-spill quick-disconnect fittings for 2500 psi maximum hydraulic source input
- Portable Hydraulic Power Source that provides 8 gpm @ 2000 psi with 20 feet (6 m) of hydraulic hose
of 2
GMP eCapstan
- Pull 15,000 ft of fiber on a single battery charge*
- Quiet operation improves job site communication and safety
- One person operation
- Adjustable pulling force and speed with ability to reverse pull
- Work earlier or later with less concern over noise ordinances
- Electronically controlled pulling setpoints from 0-800+ lbs
*Estimated based on average pull and average speed, exact distance per charge may vary
Learn more about the eCapstan!
GMP HYDRAULIC CABLE PULLER
- Adjustable pull control, up to 1000 lbs. maximum on a 40 in. diameter capstan
- Control panel with pressure gauge, pressure adjustment knob and directional foot control valve
- Three versatile setup options are available: Self-Support, Vehicle Receiver Mount and Socket Mount
- Speeds up to 425 ft/min @ 15 gpm flow
- 1/2 in. (12.7mm) non-spill quick-disconnect fittings for 2500 psi maximum hydraulic source input
- Portable Hydraulic Power Source that provides 8 gpm @ 2000 psi with 20 feet (6 m) of hydraulic hose
Learn more about the hydraulic cable puller!
of 2
NEED TO RENT OR LEASE?
Fill out this form and we can help get your communites connected!
