Cable Pulling Equipment

Results: 90

Cable Pulling Equipment & Fiber Pulling Accessories

Efficient cable installation starts with equipment built for demanding jobsite conditions. Millennium Broadband Solutions supplies pulling grips, reel caddies and fiber pulling accessories that help crews place cable safely while limiting tension.

For larger pulls, see our cable puller, capstan and winch options, including rentals. Our team can help you choose the right setup for your route.

Manhole Sheave-Corner Cable Guide 3" 7500 lb rated, parallel digging bar sold separately, GMP

Compare

Reel Stand, XL Reel Buck, GMP 71679, 60" Spindle Bar for 54" wide drum/ 84" Diameter Drum, GMP

Compare

Swivel, Ball Bearing, 3/8" width, 2250# Underground, 1350# Aerial, Stainless Steel, Heavy Duty, Price per each, GMP

Compare

Tension Eye Kit for Apollo: Used in the GMP Apollo lasher This kit consists of: 2 BEARING TENSIONING ROLLER 2 ROLLER UPPER TENSIONING 2 SHAFT UPPER TENSION ROLLER 2 PIN TENSIONER APOLLO 2 ROLLER TENSION LOWER ASSEMBLY, GMP

Compare

Rod on Reel Repl. 3/8" x 600 ft, for Good Buddy 2, marked, Jameson, LLC

Compare

Reel Lifter, hole range 3-6 in, 4500 lbs lifting capacity, GMP

Compare

Pulling Grip, 1.18" - 1.57" Cable Diameter Range, Double Braid, One Eye, 8148# Tensile Strength, GMP

Compare

Strand Tensioner and Puller, Chicago grip/pork chop, .218" - .55", Klein, Klein Tools

Compare

Rope, Polypropylene Hand-Line with Snap Hook, Price Per Each, Klein Tools

Compare

Strand Tensioner and Puller, Chicago grip/pork chop, .125" - .50", Klein, 3 per pack, price per pack, Klein Tools

Compare

Strand Tensioner and Puller, Haven's Cable Grip. 0.75", 8000 lb Capacity, Price Per Each, Klein Tools

Compare

Wire Dispenser, Spools Up To 34" in Diameter, Rack-a-Tiers, Price per ea, Rack-A-Tiers

Compare

Strand Tensioner and Puller, Haven's Cable Grip. 0.25", 2500 lb Capacity, Price Per Each, Klein Tools

Compare

Grip, Double Weave, Flexible Eye Pulling Grips, price per each, Klein Tools

Compare

Wire Tub, 360 degree feed, 3-way adjustable center hub, removable top plate, handle for rewinding wire, 24" diameter capacity, Price Per Each, Rack-A-Tiers

Compare

Cable Bending Shoe, 3.00", Steel w/Polymer Coating, GMP

Compare

Pulling grip, Non-Metalic, 700lb. rating, 55 Inches long, 6 Pack, 3 small grips, green grip for 3/8 to 3/4 inch and 3 large grips, red grip for 3/4 to 1-3/8 inch , GMP

Compare

Reel Cable Caddy, Black in Color, Holds Spools 20" in Diameter and 17" in Height., Jonard Industries Corp.

Compare

Cable Pulling Equipment