The Fremco Adaptor Plate Kit, 11.0 x 16 mm, for 9-10 mm cable (vendor part 103-141112011, Millennium part 537746), sets a Fremco cable blower to grip cable in the 9-10 mm range for consistent feed through duct during jetting operations. Swapping to this plate size lets placing crews handle a heavier cable diameter on the same blower platform used for smaller microcable jobs. It is built to Fremco's tolerances for repeated field changeovers across an OSP fiber build. Stock it with duct clamps and gaskets sized for the same 9-10 mm cable range.