Tornado Max Fiber Blower

• The Tornado Cable Blowing Machine is designed to be
  safe, fast and effective, even on tough terrain, the Tornado cable
  blowing machine will move fiber optic cable of 0.23 to 1.34 in.
  (5.84-34mm) diameter at speeds to 300 ft./min. (90 m/min.)
  into pre-installed innerduct or direct-buried duct. Tornado MAX includes everything you need in one part number
  for most fiber/duct options.
• It can accommodate innerduct from .47 to 2.48
  in.
  (12-63mm) (12-63mm). A conversion kit allows the Tornado to place
  12.7/10mm, 12/10mm or 10/8mm micro duct into the inner duct. (sold
  separately)
• Comprised of an aluminum air box and cable pusher,
  the Tornado uses compressed air to install the cable with or without
  a missile. In operation, the hydraulically powered, caterpillar belt
  drive system controls the fiber optic cable as it is propelled by
  compressed air into the duct. An electronic monitoring system
  provides read-outs of speed and distance, protects cable against duct
  obstructions, and includes an emergency stop facility.
• The air box and cable pusher are mounted on a
  lightweight, tubular-steel frame that can be tilted at a 30-degree angle
  to the manhole, which minimizes significantly any bending of the innerduct
  and cable. The frame has height adjustment to permit ease of
  maneuverability, and adjustable rear legs that provide added stability on
  uneven terrain.
• Can also be used without the frame, directly from
  its skid.
• The Junction Box Adapter is a necessary accessory
  for overriding existing cable in an occupied duct (space permitting).
  One branch attaches to the Tornado for placing the new cable or micro
  ducts, while the other branch seals off and holds the existing cable
  in the duct (sold separately).
• Included with the Tornado is a convenient toolbox
  with all the tools needed for use and maintenance of your blower.
• All relevant parts and components of the cable
  blowing machine and the hydraulic power pack are specially treated to
  resist corrosion.

Operating
Capacities

Pushing
Force: 0-220 lbs. (0-100kg)
Pushing Speed: 0-300 ft/min (0-90m/min)
Cable Size: .24-1.34″ (6-34mm)
O.D.
Sub – Duct Size: 1/2-2 1/2″ SDR (12-63mm) O.D.

Pneumatic
System

Air Hose
Bore (min): 1
1/4″ (32mm)
Operating Pressure: 175 psi (12 bar)
Flow: The air supply should be filtered, cooled and
dry
For Ducts with an Inner Diameter of: Minimum Flow Acceptable @175 psi (12 bar)
0 up to 1″ (0 up to 25mm) : 150 CFM (4m³/min)
1 up to 1 1/8″ (26 up to 30mm) : 185 CFM (5m³/min)
1 1/8 up to 1 3/8″ (31 up to 35mm) : 250 CFM (7m³/min)
1 3/8 up to 1 5/8″ (36 up to 40mm) : 375 CFM (10m³/min)
1 5/8 up to 1 3/4″ (41 up to 44mm) : 450 CFM (12m³/min)
1 3/4 up to 2″ (44 up to 51mm): 700 CFM 19m³/min